In the selection review of flexible soft magnetic wave plates, engineers usually compare two parameters: filler formula and filling rate. Flake FeSiAl, flake carbonyl iron powder, spherical and flake mixed systems - the formula determines the type of loss mechanism; The filling rate determines the density of the magnetic loss source. If these two parameters are matched, it seems that the material can enter the sample verification.
However, two batches of materials with the same formula and filling rate may differ by more than 10 dB in reflection loss testing. Retest the filling rate, and the data is consistent; Re measure the magnetic permeability, and a difference has appeared. The problem is not 'how much filler was used', but 'how was the filler arranged'. The orientation degree of the sheet-like filler in the polymer matrix is the third variable of the magnetic properties of the flexible soft magnetic absorbing wave plate - it is not included in the formula column of the specification book, but determines whether the formula can be fulfilled.
The demagnetization factor of sheet-like particles: orientation determines "from which direction the magnetic flux enters"
The geometric shape of sheet-like particles is anisotropic: the in-plane size is much larger than the thickness direction. This geometric feature brings about anisotropy in demagnetization factor - when the magnetic flux passes along the plane of the sheet, the demagnetization factor is small and the magnetic resistance is low; When the magnetic flux passes perpendicular to the plane of the sheet, the demagnetization factor is large and the magnetic resistance is high.
The difference in magnetic flux paths between horizontal orientation and random orientation
Horizontal orientation:When the sheet-like particles are arranged horizontally (with the sheet-like plane parallel to the substrate surface), the magnetic flux enters the material from the normal direction of the substrate and encounters the "large surface" of the sheet-like particles - the magnetic flux needs to propagate around the sheet-like plane, with high in-plane magnetic permeability and continuous magnetic coupling path. The advantage of aspect ratio of sheet-like particles is fully utilized: at the same filling rate, the probability of overlapping between horizontally oriented particles is higher, forming a continuous magnetic coupling network.
Random orientation:The sheet-like plane of some particles is perpendicular to the surface of the substrate. These "upright" particles encounter their "thin edges" when the magnetic flux enters from the normal direction - with a large demagnetization factor and high magnetic resistance. The contribution of these particles to the effective magnetic permeability is weakened, and the magnetic coupling network exhibits "breakpoints" at these positions. The equivalent magnetic permeability decreases as a result, and the peak reflection loss decreases.
The Chain Effect of Orientation Degree on Three Performance Dimensions
Orientation not only affects magnetic permeability, but also affects eddy current loss and impedance matching through magnetic permeability, forming a chain effect.
Firstly, effective magnetic permeability
When oriented horizontally, the in-plane demagnetization factor is small, and the magnetic moment of the sheet-like particles is more likely to flip in-plane, with both μ 'and μ' being at a high level. When randomly oriented, the demagnetization factor of the upright particles is large, the magnetic moment reversal is hindered, and the effective μ 'and μ' decrease synchronously. There are studies showing that the real and imaginary parts of the complex magnetic permeability of sheet-like carbonyl iron after magnetic field extraction are significantly higher than those of non oriented samples, with the difference being particularly significant in the GHz frequency band.
Secondly, eddy current losses
The eddy current path of sheet-like particles is limited to an extremely thin cross-section, which is the physical basis for reducing eddy current losses through flaking. But this advantage only holds when the sheet-like plane is parallel to the direction of the magnetic field. When oriented horizontally, the eddy current path is the shortest and eddy current losses are effectively suppressed; When randomly oriented, the angle between the sheet-like plane of some particles and the direction of the magnetic field is large, the eddy current path becomes longer, and the eddy current loss increases. This loss does not contribute to absorption, but instead reduces the effective magnetic permeability of the material.
Thirdly, impedance matching
The change in orientation degree effectively alters the μ 'and also changes the input impedance of the material (related to √ (μ/ε)). When oriented horizontally, μ 'is higher, the input impedance is closer to free space, and electromagnetic waves are more likely to enter the interior of the material; When randomly oriented, μ 'decreases, the input impedance deviates from the matching point, reflection increases, and the energy entering the material decreases. The decrease in orientation weakens both the "energy entry" and "energy decay" processes.
Engineering boundary of three oriented process paths
The orientation degree of sheet-like fillers is determined by the molding process. Three common paths:
Firstly, magnetic field orientation
When an external magnetic field is applied to the uncured composite material, the sheet-like particles turn under the action of magnetic torque, and the sheet-like plane tends to be perpendicular to the direction of the magnetic field (or parallel to the substrate, depending on the direction of the magnetic field). The orientation degree of magnetic field orientation is high, suitable for scenarios with strict requirements for magnetic properties. The cost is high process complexity - requiring magnetic field generation equipment, controlling the curing time window, and ensuring the uniformity of the magnetic field inside the material. For large-sized sheets, the difficulty of controlling magnetic field uniformity increases with size.
Secondly, shear orientation
During the coating, rolling, or extrusion process, the shear flow field makes the plane of the sheet-like particles tend to be parallel to the flow direction. The cost of shear oriented equipment is lower than that of magnetic field oriented equipment, making it suitable for continuous production. However, the degree of orientation is jointly affected by shear rate, matrix viscosity, and filler content - if the shear rate is too low, the orientation is insufficient; Excessive shear rate may introduce bubbles or damage sheet-like particles. The orientation degree of shear orientation is usually lower than that of magnetic field orientation, but it is sufficient to significantly improve magnetic performance.
Thirdly, non oriented (randomly dispersed)
The simplest process path with the lowest cost. The magnetic properties of randomly oriented samples are lower than those of oriented samples, but for certain application scenarios (such as those that do not require high absorption peaks and are more concerned with cost and supply stability), random orientation can still provide usable performance. When selecting, it is necessary to clarify whether the performance requirements of the application scenario are worth paying additional costs for the orientation process.
Coupling of orientation degree and filling rate: not two independent variables
The improvement of orientation is about "filler utilization efficiency", not "filler dosage"
Orientation degree and filling rate are not independent optimization variables. Under the same filling rate, increasing the orientation degree can enhance the magnetic performance; Under the same magnetic performance target, increasing the orientation degree can reduce the required filling rate, thereby improving flexibility. The coupling of two variables provides an additional relief path for the filling rate paradox. For flexible scenes with limited filling rate (such as wearable devices and curved shells), if the filling rate cannot be infinitely increased, increasing the orientation degree is an effective way to improve magnetic performance without increasing the filler content. The increase in orientation does not change the volume fraction of the polymer, so it does not sacrifice flexibility like increasing the filling rate. This is the unique value of orientation technology in flexible wave absorbing plates - it improves the "utilization efficiency of fillers" rather than the "amount of fillers used".
Selection and judgment of flexible soft magnetic wave plate based on "orientation degree × filling rate"
Firstly, suppliers are required to provide orientation data or orientation process instructions, rather than just providing formulas and filling rates
The orientation degree can be indirectly characterized by X-ray diffraction, scanning electron microscopy cross-sectional observation, or anisotropy of magnetic properties. If the supplier only provides "XX% filling rate of FeSiAl flakes" without specifying the orientation state, the performance differences of the same formula at different orientation degrees cannot be predicted.
Secondly, compare the magnetic properties of the "oriented" and "non oriented" versions during the sample stage to quantify the benefits of the orientation process
Require suppliers to provide comparative data on the μ ', μ', and reflection loss of oriented and randomly oriented samples under the same formula and filling rate. If the performance improvement brought by orientation is significant (such as a peak reflection loss increase of more than 5 dB), the cost of the orientation process is worth it; If the improvement is limited, a random orientation scheme may be a more economical starting point.
Thirdly, in scenarios where the filling rate is limited, priority should be given to evaluating the orientation process rather than increasing the filling rate
The increase in orientation does not increase the volume fraction of fillers and does not sacrifice flexibility. For scenarios with small bending radius and multiple bending cycles, increasing the orientation degree is a more "gentle" performance improvement path than increasing the filling rate.
Fourth, confirm the matching relationship between the orientation direction and the polarization direction of the antenna
The orientation direction of the sheet-like filler determines the anisotropy of its magnetic properties. If the magnetic field direction of the tag antenna does not match the direction of the patch plane, the performance advantage brought by orientation may not be realized. When selecting, it is necessary to confirm the relationship between the orientation direction of the sheet and the polarization direction of the antenna, and adjust the mounting direction of the sheet if necessary.
Advanced Institute (Shenzhen) Technology Co., LtdThe flexible soft magnetic wave plate product line covers both magnetic field orientation and shear orientation process paths for sheet-like FeSiAl and carbonyl iron powder composite systems, providing orientation characterization data, magnetic performance comparison data between oriented and non oriented samples, and matching evaluation of orientation direction and antenna polarization direction.
The product supports matching of orientation process and filler morphology based on filling rate constraints, flexibility requirements, and antenna polarization direction. For more technical information, please visithttp://www.avanzado.cn/.


