Our main products include flexible substrate coating, shielding materials, absorbing materials, precious metal slurries, and more!
en

Current:Home >
Company news
-
Frontier News
- Advanced Institute (Shenzhen) Technology Co., Ltd
- 软磁吸波材料的“介电常数陷阱”:为什么磁损耗达标了,反射损耗仍然很差
- 软磁吸波材料的“Snoek极限”突围:为什么球状粉体到了GHz频段就不够用
- Why does the contact pressure loosen first during the cooling stage when there is no adhesive buffer layer for the "thermal cycle breathing" of adhesive free copper foil tape
- The "cost of removing the adhesive layer" of adhesive free copper foil tape: why does the reliability of grounding rely more on interface management instead of adhesive
- The "alignment sensitivity" of magnetic sheets used in RFID: why the same sheet offset by 0.5 mm may result in a drop in reading distance by one level
- The 'tolerance chain' of magnetic sheets used in RFID: why do sheets of the same model match well on project A, but need to be re tuned when switching to project B
- The "dual sided" nature of magnetic sheets used in RFID: it suppresses eddy currents, but also becomes the source of antenna misalignment
- The "grade misuse" of flame-retardant copper foil tape: why UL94 V-0 cannot be used as a barrier to block thermal runaway of battery packs
- The "flame retardancy" of flame-retardant copper foil tape does not come from copper foil: why the key to UL94 V-0 lies in the adhesive layer, and why the thickness must be read together with the grade
- The "thickness inflection point" of anti metal magnetic separators: why does the reading distance increase first and then decrease from 0.1 mm to 0.3 mm
- The 'ferromagnetic substrate blind zone' of anti metal magnetic separators: why is the effective solution for sticking to aluminum plates completely ineffective when sticking to stainless steel
- The "curvature mismatch" of anti metal magnetic separators: why does the reading distance shrink on curved metal shells after passing verification on flat metal plates
- The 'cooling trap' of high-temperature resistant copper foil tape: why the cooling stage of temperature cycling is more damaging to the interface than the heating stage
- The "temperature resistance" of high-temperature resistant copper foil tape is not the temperature resistance of the substrate: why can the substrate withstand 260 ℃, and the tape starts to layer at 150 ℃
- The "shape effect" of anti metal magnetic plates: why do circular, square, and track shaped materials have significant differences in reading distance on the same label
- Mismatch of "eddy current scale" of anti metal magnetic plates: The same magnetic plate is effective when attached to small metal parts, but completely fails when attached to large metal plates
- The premise of the "closed loop" of the anti metal magnetic sheet: why is it that even if a magnetic sheet is attached, the label still cannot be read on the metal surface
- The "release film aging" of adhesive backed copper foil tape: why do the same batch of materials begin to wrinkle and peel off on the production line after being stored for three months
- The "overflow boundary" of adhesive backed copper foil tape: Why does the adhesive layer climb out of the edge of the copper foil under high temperature service, and how it affects adjacent circuits
-
-