News center

Hotline:0755-22277778 Tel：0755-22277778
Mobile：13826586185（Mr.Duan）
Fax：0755-22277776
E-mail：duanlian@xianjinyuan.cn

Company news

200-250 mesh screen printed alumina high-temperature ceramic sintering 10-15 minutes conductive silver paste

Time：2022-09-22Number：1312

Product SpecificationHigh-temperature sintered silver pasteCeramic sintered silver pasteHigh temperature conductive silver paste

Product/product:	High power resistor paste
Part number/Part number:	05H06 series

Scope of application:

This product is suitable for use with high-power resistors.

The resistor paste applies to High power Resisto
Usage conditions/Operating conditions：

base material

Substrate

Alumina ceramics

96% alumina surface roughness 3-5μm

Printing

200-250 mesh screen printing

200-250 mesh stainless screen

leveling

Levelling

Level at room temperature for 5-15 minutes (depending on the actual leveling situation).

5-15min minutes at room temperature

dry

Drying

Bake in a ventilated oven at 100-150 ℃ for 10-15 minutes

(If the air test temperature is below 300 ℃, the baking time can be determined according to the actual baking situation.)

100-150℃10-15 min

sinter

Firing Condition

Sintering in tunnel furnace air atmosphere, peak value 850 ± 2 ℃ (recommended value), 9-11 minutes.

Atmospheric firing in belt furnace with peak time of 9-11 Minutes at 850±2℃

Thinner

ST1000，ST1001

Performance/Characteristics：

1. Slurry performance/Paste Characteristics：

Performance Characteristics

Standard Standard

Testing methods and conditions

Test method and conditions

Fineness

≤8μm

FOG test

Viscosity

100-200Pa.s

Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm,25±1℃，

Brookfield HBT viscometer, rotor SC4-14/6R, 10rpm,25±1℃

The viscosity can be adjusted according to the actual needs of the user.

2. Characteristics after sintering/Characteristics after firing：

Under the sintering conditions of 1), the film thickness of 8-12mm was checked and the fired film was produced under the conditions specified in 1), (Film thickness is 8-12mm.)

characteristic Characteristics		Standard standard	Testing methods and conditions Test method and conditions
3	appearance Appearance	Compact, dense Compact and unknit	Eyeballing
4	Square resistance value Resistivity

电阻浆料

Pre

Back

Our main products include flexible substrate coating, shielding materials, absorbing materials, precious metal slurries, and more!

Provide customers with professional and convenient electromagnetic shielding and conductive material application solutions

Flexible electrode materials, shielding materials, conductive materials, absorbing materials, and new material technology solution providers

200-250 mesh screen printed alumina high-temperature ceramic sintering 10-15 minutes conductive silver paste