Our main products include flexible substrate coating, shielding materials, absorbing materials, precious metal slurries, and more!

Current：Home >Company news >Frontier News >The receiving end cannot simply copy the transmitting end's scheme with the magnetic isolation plate: the same material is used, and two different sets of constraints are faced on both sides

News center

Hotline:0755-22277778 Tel：0755-22277778
Mobile：13826586185（Mr.Duan）
Fax：0755-22277776
E-mail：duanlian@xianjinyuan.cn

Frontier News

The receiving end cannot simply copy the transmitting end's scheme with the magnetic isolation plate: the same material is used, and two different sets of constraints are faced on both sides

Time：2026-11-04Number：3

Pre

Back

Related news

2023-02-28Advanced Institute (Shenzhen) Technology Co., Ltd
2026-11-04The responsibility of the "battery side" of the receiving end's magnetic isolation sheet: why does not only the metal backplate become hot when the magnetic isolation sheet saturates
2026-11-04Penetrating conductivity of embossed copper foil tape: why the contact resistance may be an order of magnitude higher despite the seemingly good flat bonding
2026-11-04The selection of adhesive layer for copper foil tape is more prone to errors than the copper foil itself: the engineering boundaries of acrylic, rubber, and silicone
2026-11-03The "installation yield" of wireless charging receiver magnetic isolation sheets: why 0.08 mm magnetic isolation sheets are much more fragile on automated production lines than on specifications
2026-11-03Why does the design margin determine the user experience more than the nominal efficiency when the coil deviates by 5 mm in the "offset condition" of the magnetic separator of the wireless charging receiver
2026-11-03The 'narrow corridor' of wireless charging receiver's magnetic separator: when thickness, efficiency, and surface temperature are simultaneously limited at the receiving end
2026-11-02The logic of "tin layer consumption" of tin plated copper foil tape: how the protective layer can reverse and become the source of contact resistance under long-term high temperature service
2026-11-02The logic of the "oxide layer" of tin plated copper foil tape: why tin oxide is more "friendly" than copper oxide
2026-11-02The "invisible interference" of wireless charging magnetic separators on FOD: why the charger starts to frequently stop charging after replacing it with a "better performance" magnetic separator

Our main products include flexible substrate coating, shielding materials, absorbing materials, precious metal slurries, and more!

Provide customers with professional and convenient electromagnetic shielding and conductive material application solutions

Flexible electrode materials, shielding materials, conductive materials, absorbing materials, and new material technology solution providers

The receiving end cannot simply copy the transmitting end's scheme with the magnetic isolation plate: the same material is used, and two different sets of constraints are faced on both sides