Our main products include flexible substrate coating, shielding materials, absorbing materials, precious metal slurries, and more!

News center

Hotline:0755-22277778 Tel：0755-22277778
Mobile：13826586185（Mr.Duan）
Fax：0755-22277776
E-mail：duanlian@xianjinyuan.cn

Frontier News

The illusion of "initial low resistance" of conductive copper foil tape: why does the multimeter test pass, but the whole machine ESD still fails

Time：2026-11-10Number：12

Pre

Back

Related news

2023-02-28Advanced Institute (Shenzhen) Technology Co., Ltd
2026-11-10The thickness of the adhesive layer of conductive copper foil tape is not "thinner is better": the triangular constraint between Z-axis resistance, peel strength, and long-term reliability
2026-11-10The "demagnetization factor" of the receiving end soft magnetic sheet: why the magnetic permeability of the same roll of material is no longer the same when cut into different sizes
2026-11-10The "distribution pattern" of soft magnetic chips at the receiving end: why are there both a batch of "soft" and a batch of "hard" products on the production line when the average value meets the standard
2026-11-10The "coercive force drift" of the receiving end soft magnetic sheet: why does the low loss material on the specification sheet widen the hysteresis loop after being attached to the coil
2026-11-07The "dielectric constant blind zone" of flexible ferrite receiving magnetic sheets: why the magnetic permeability meets the standard, but the NFC reading distance is still not enough
2026-11-07The "bending asymmetry" of flexible ferrite receiving magnetic sheets: why the magnetic permeability on the stretching and compression sides is no longer equal after fitting the curved surface
2026-11-07The "adhesive variable" of flexible ferrite receiving magnetic sheets: for the same ferrite powder, using a different polymer may result in a performance difference of one order of magnitude
2026-11-06The "galvanic corrosion" trap of conductive cloth tape: why does the grounding interface accelerate degradation in humid and hot environments when the nickel plating layer comes into contact with different metals
2026-11-06Compression rebound and grounding impedance of conductive tape: why the tighter the compression, the better the grounding may not be

Our main products include flexible substrate coating, shielding materials, absorbing materials, precious metal slurries, and more!

Provide customers with professional and convenient electromagnetic shielding and conductive material application solutions

Flexible electrode materials, shielding materials, conductive materials, absorbing materials, and new material technology solution providers

The illusion of "initial low resistance" of conductive copper foil tape: why does the multimeter test pass, but the whole machine ESD still fails